Original Prusa XL+High Demand - Estimated leadtime 3–4 weeks.$2,128.70
Prusa Research
FDM
Seller: Prusa Research
Specifications
| Build volume | 360 × 360 × 360 mm (46.7 l)360 by 360 by 360 millimeters, 46.7 liters |
| Toolheads | Up to 5 independent toolheads, automatic tool changing |
| Tool offset calibration | Fully automatic - dedicated electronic sensor (new) |
| First layer calibration | Fully automatic (LoadCell) |
| Motion system | CoreXY, 1.5 mm GT belts, Input Shaper, Phase Stepping |
| Nozzle wiper | Yes (new) |
| Print speed | 10-15% faster than the Original Prusa XL |
| Extruder | Nextruder, direct drive |
| Max nozzle temperature | 290 °C290 degrees Celsius |
| Heatbed | Segmented, 16 individually controlled tiles, up to 120 °C |
| Chamber temperature | Up to 50 °C with Enclosure for Prusa XL+, up to 60 °C with the external heater (both optional) |
| Supported materials | PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB, carbon-fiber composites |
| Material policy | Open - any brand's 1.75 mm filament; no chips, no lock-in, no subscriptions |
| Non-FDM toolheads | Silicone printing Q4 2026 |
| Print surface | Removable Double-Sided Satin Print Sheet |
| Connectivity | Ethernet, optional Wi-Fi; Prusa Connect optional - fully offline capable |
| Printer dimensions | ~700 × 900 × 720 mm, ~30 kgAbout 700 by 900 by 720 millimeters, about 30 kilograms |
| Serviceability | User-serviceable with a screwdriver; published repair guides; spare parts readily available |
| Firmware | Open-source; ships with the full current Prusa feature set |
| Made in | Prague, EU & Delaware, USA |
| Build volume | 360 × 360 × 360 mm (46.7 l)360 by 360 by 360 millimeters, 46.7 liters |
| Toolheads | Up to 5 independent toolheads, automatic tool changing |
| Tool offset calibration | Fully automatic - dedicated electronic sensor (new) |
| First layer calibration | Fully automatic (LoadCell) |
| Motion system | CoreXY, 1.5 mm GT belts, Input Shaper, Phase Stepping |
| Nozzle wiper | Yes (new) |
| Print speed | 10-15% faster than the Original Prusa XL |
| Extruder | Nextruder, direct drive |
| Max nozzle temperature | 290 °C290 degrees Celsius |
| Heatbed | Segmented, 16 individually controlled tiles, up to 120 °C |
| Chamber temperature | Up to 50 °C with Enclosure for Prusa XL+, up to 60 °C with the external heater (both optional) |
| Supported materials | PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB, carbon-fiber composites |
| Material policy | Open - any brand's 1.75 mm filament; no chips, no lock-in, no subscriptions |
| Non-FDM toolheads | Silicone printing Q4 2026 |
| Print surface | Removable Double-Sided Satin Print Sheet |
| Connectivity | Ethernet, optional Wi-Fi; Prusa Connect optional - fully offline capable |
| Printer dimensions | ~700 × 900 × 720 mm, ~30 kgAbout 700 by 900 by 720 millimeters, about 30 kilograms |
| Serviceability | User-serviceable with a screwdriver; published repair guides; spare parts readily available |
| Firmware | Open-source; ships with the full current Prusa feature set |
| Made in | Prague, EU & Delaware, USA |
| Build volume | 360 × 360 × 360 mm (46.7 l)360 by 360 by 360 millimeters, 46.7 liters |
| Toolheads | Up to 5 independent toolheads, automatic tool changing |
| Tool offset calibration | Fully automatic - dedicated electronic sensor (new) |
| First layer calibration | Fully automatic (LoadCell) |
| Motion system | CoreXY, 1.5 mm GT belts, Input Shaper, Phase Stepping |
| Nozzle wiper | Yes (new) |
| Print speed | 10-15% faster than the Original Prusa XL |
| Extruder | Nextruder, direct drive |
| Max nozzle temperature | 290 °C290 degrees Celsius |
| Heatbed | Segmented, 16 individually controlled tiles, up to 120 °C |
| Chamber temperature | Up to 50 °C with Enclosure for Prusa XL+, up to 60 °C with the external heater (both optional) |
| Supported materials | PLA, PETG, ASA, ABS, PC, PA (nylon), TPU, PVA, HIPS, PP, CPE, PVB, carbon-fiber composites |
| Material policy | Open - any brand's 1.75 mm filament; no chips, no lock-in, no subscriptions |
| Non-FDM toolheads | Silicone printing Q4 2026 |
| Print surface | Removable Double-Sided Satin Print Sheet |
| Connectivity | Ethernet, optional Wi-Fi; Prusa Connect optional - fully offline capable |
| Printer dimensions | ~700 × 900 × 720 mm, ~30 kgAbout 700 by 900 by 720 millimeters, about 30 kilograms |
| Serviceability | User-serviceable with a screwdriver; published repair guides; spare parts readily available |
| Firmware | Open-source; ships with the full current Prusa feature set |
| Made in | Prague, EU & Delaware, USA |
Email this printer to yourself
Get the printer info and affiliate link sent to your email for later purchasing.